fuel handling

Development of Simulating Control Device for Fuel Handling System in HTR-10

HTR-10燃料元件装卸控制模拟装置的研制

All handling charge, airport security fee, fuel surcharge and insurance surcharge are not included.

以上价格为每人费用, 不包括机场税,燃油附加费用, 机场保安费用,兵险费用.

Verification Test of Fuel Handling System of HTR-10

HTR-10燃料元件装卸系统调试试验

Many lines are offering to carry containers on the route in return for only the fuel price, port handling and currency surcharges. The price to cover the shipping cost is zero.

许多航运公司给出的欧亚航线报价仅为燃油费、港杂费与汇率附加费之和，航务公司自己的运输费用为零。

The fuel handling machine, one of the important facilities of this system, has past the ex-factory test, which indicates that it can meet the function requirements and its design is proper.

工艺运输系统的重要设备装卸料机已通过出厂验收，达到了功能要求，证明设计是合理的。

The essential principle and implementation of the bi directional detector for Fuel Handling System ( FHS) in 10MW High Temperature gas cooled Reactor ( HTR 10) are presented.

介绍了10MW高温气冷堆燃料元件装卸系统双向探测器的基本原理和实现方法。

Bridge Balance Control of Fuel Handling Machine for Daya Bay Nuclear Power Plant The hook and rope of a crane can be regarded as a pendulum that is drived by slewing motion and derricking motion and cause sway.

大亚湾核电站核燃料运输吊车桥架驱动双控制器闭环控制起重机这类起重运输设备的吊钩缆绳可以看作受大车、车运动驱动的机械摆，会产生摆振。

CANDU 6 Units Fuel Handling System

秦山三期CANDU6机组的燃料操作系统

Improvement on counter circuit of 10MW HTR fuel handling system

高温气冷堆燃料装卸系统计数器电路改进设计

Automobile aerodynamics characteristics have great effects on traction ability , fuel cost, handling and stability.

汽车的空气动力学特性对汽车行驶的动力性 、 燃油经济性和操纵稳定性有着重要影响.

Research on HTR-10 Fuel Handling Control System

HTR-10燃料元件装卸集散控制系统的研究

Automotive performance, including security, power, fuel economy and handling stability, is directly affected by lightweight design of automobile.

汽车轻量化设计水平的高低直接影响到汽车的安全性、动力性、燃油经济性和操纵稳定性。

It was shown by the experimental results that perfect signals were obtained by using the induction coil as sensor, which could meet the demands of the fuel handling system for HTR 10.

实验结果表明，采用电感线圈作为敏感元件可以获得理想的检测信号，满足实际使用要求。

According to the design safety limits of the fuel elements handling system, the fuel elements transport speed was analyzed with the pneumatic transport theory by using all the real parameters in the reactor operation state, and the transport speed was measured with the sound intensity analysis method.

依据燃料元件循环系统设计安全限值，利用气力输送理论，使用反应堆运行工况下参数，对燃料元件输送速度进行了分析，并采用声强分析方法进行了实际输送速度的测量。

Qinshan CANDU nuclear fuel handling system is described in detail.

详述了秦山CANDU堆燃料操作系统,包括新燃料贮存和运输系统、乏燃料贮存和运输系统、燃料更换系统以及远距离观测摄像机.

Nuclear fuel handling and storage system ( PMC) is a system which directly handles nuclear fuel assemblies, namely, it directly faces to nuclear fuel cladding which is the first of the three barriers of nuclear safety for nuclear power station.

PMC核燃料装卸贮存系统直接吊装核燃料组件，即直接面对核电站三道屏障中的第一道屏障&燃料包壳，其安全性是核电站核安全的重要保障。

The principle thus appears: what is done to the fuel in handling must be undone before it can be used.

这个原则因此产生了：在燃油可以使用之前对其搬运中的“所做的事”必须恢复原状。